Difference between revisions of "IPC2 Errata Notes"

Revision as of 08:07, 12 February 2018

Date: 8-Dec-2015
Symptom: LAN1 (I218) operates at 10 Mbps instead of 1000 Mbps
Applies to: Applies to products produced between 12 Nov, 2015 - 10 Dec, 2015. List of IPC2 computers with respective SN requires to apply the fix
Cause: Data corruption during production programming phase
Fix: Contact manufacturer

Date: 17-May-2017
Symptom: LAN1 (I218) is not detected by the OS if computer is rebooted with unplugged port
Applies to: Applies to IPC2 Broadwell computers that shows such behavior.
Cause: IPC2 Broadwell doesn't implement Ultra Low Power mode (Connected Standby).
Fix: Install update I218 driver by installing PROWin (22.3) suite for your OS with connected LAN cable.
- Windows 10 driver: Intel® Network Adapter Driver for Windows® 10*
- Windows 7 driver: Intel® Network Adapter Driver for Windows 7*
- After installation go to I218 driver properties - "Power Management" tab and uncheck "Ultra Low Power Mode when cable is disconnected" option in "Power Saver Options" list.
- The procedure required after each driver reinstall.

Revision as of 10:37, 17 May 2017 (view source) Maxim (Talk \| contribs) (→‎IPC2ERR002: LAN1 (I218) Ethernet OS detection issue) (change visibility) ← Older edit		Revision as of 08:07, 12 February 2018 (view source) Irads (Talk \| contribs) (→‎IPC2ERR002: LAN1 (I218) Ethernet OS detection issue) (change visibility) Newer edit →
Line 19:		Line 19:

	[[category:IPC2]]		[[category:IPC2]]
		+	[[category:errata]]