Difference between revisions of "IPC2 Errata Notes"

Revision as of 10:31, 17 May 2017

Date: 8-Dec-2015
Symptom: LAN1 (I218) operates at 10 Mbps instead of 1000 Mbps
Applies to: Applies to products produced between 12 Nov, 2015 - 10 Dec, 2015. List of IPC2 computers with respective SN requires to apply the fix
Cause: Data corruption during production programming phase
Fix: Contact manufacturer

Date: 17-May-2017
Symptom: LAN1 (I218) is not detected by the OS if computer is rebooted with unplugged port
Applies to: Applies to IPC2 Broadwell computers that shows such behavior.
Cause: IPC2 Broadwell doesn't implement Ultra Low Power mode (Connected Standby).
Fix: Install update I218 driver by installing PROWin (22.3) suite for your OS with connected LAN cable.
- Windows 10 driver: Intel® Network Adapter Driver for Windows® 10*
- After installation go to I218 driver properties - "Power Management" tab and uncheck "Ultra Low Power Mode when cable is disconnected" option in "Power Saver Options" list.
- The procedure required after each driver reinstall.

@@ Line 4: / Line 4: @@
 * '''Applies to''': Applies to products produced between 12 Nov, 2015 - 10 Dec, 2015. [https://docs.google.com/spreadsheets/d/1VgIJHgEf-dqfLlsAL6bAp5P2mXXUrXf_MVCtt2kdFgo/edit#gid=0 List of IPC2 computers with respective SN requires to apply the fix]
 * '''Cause''': Data corruption during production programming phase
-* '''Fix''': Contact manufacturer for a patch
+* '''Fix''': Contact manufacturer
 == IPC2ERR002: LAN1 (I218) Ethernet disappearance ==