Difference between revisions of "IPC2 Broadwell security update 170523"

From fit-PC wiki
Jump to: navigation, search
Line 3: Line 3:
 
#* [http://fit-pc.com/download/intense-pc2/bios/broadwell/21-05-2017/ipc2brw_pcie_3.724.5.img.zip BIOS update for IPC2 with other FACE Modules]
 
#* [http://fit-pc.com/download/intense-pc2/bios/broadwell/21-05-2017/ipc2brw_pcie_3.724.5.img.zip BIOS update for IPC2 with other FACE Modules]
 
# Extract the image file from the archive.
 
# Extract the image file from the archive.
# Prepare bootable USB image:
+
# Prepare bootable USB flash drive:
#* Use Win32DiskImager utility for Windows: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]<br>
+
#* Windows users - use Win32DiskImager utility: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]
 +
#* Linux users:
 +
#** Run this command to figure out what device name was assigned to your USB drive: $ ls -all /dev/disk/by-id/
 +
#** Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=''filename.img'' of=/dev/sdx bs=1MB
 
# Boot IPC2B from the USB Flash.
 
# Boot IPC2B from the USB Flash.
 
# When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors.
 
# When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors.

Revision as of 13:51, 20 June 2017

  1. Download and save the attached archive:
  2. Extract the image file from the archive.
  3. Prepare bootable USB flash drive:
    • Windows users - use Win32DiskImager utility: Win32DiskImager
    • Linux users:
      • Run this command to figure out what device name was assigned to your USB drive: $ ls -all /dev/disk/by-id/
      • Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
  4. Boot IPC2B from the USB Flash.
  5. When boots up into FreeDOS command line run: BIOS_UPD.bat and wait for it's completion without errors.
  6. After the system will boot again into FreeDOS command line run: ME_LOCK.bat and wait for it's completion without errors.
  7. Wait until message "Please disconnect this system from power for 15 sec for completion".
  8. Power cycle the computer.