Difference between revisions of "IPC2B: USB3.0 Driver Installation Guide"

From fit-PC wiki
Jump to: navigation, search
Line 1: Line 1:
 
* This application note provides a step by step guide to install USB3.0 drivers over Windows 7.
 
* This application note provides a step by step guide to install USB3.0 drivers over Windows 7.
* This guide is applicable to IPC2-Broadwell machines.
+
* Applicable to IPC2-Broadwell machines.
  
 
==Instructions==
 
==Instructions==

Revision as of 13:42, 15 October 2018

  • This application note provides a step by step guide to install USB3.0 drivers over Windows 7.
  • Applicable to IPC2-Broadwell machines.

Instructions

  • Install the Chipset driver driver before the USB3.0 driver
  • Download the USB3.0 driver
  • Open the donloaded package
  • Run the OfflineSetup32.exe file for Windows 7 32bit or the OfflineSetup64.exe file for Windows 7 64bit
  • Follow the on-screen instructions
  • At the the end of installation process, reset the unit
  • Enter the BIOS menu by pressing the F2 key during the boot
  • Browse to the Advanced -> South Bridge Configuration -> SB USB Config menu and set the xHCI Mode setting to Enabled
  • Press the F10 key for Save&Exit
  • When the Windwos boot up, open the donloaded package
  • Run the Setup.exe file
  • Follow the on-screen instructions
  • At the the end of installation process, reset the unit