Difference between revisions of "IPC2B: USB3.0 Driver Installation Guide"

From fit-PC wiki
Jump to: navigation, search
Line 6: Line 6:
 
* Enter the BIOS menu by pressing the F key during the boot
 
* Enter the BIOS menu by pressing the F key during the boot
 
* Browse to the '''Advanced -> South Bridge Configuration -> SB USB Config''' menu and set the '''xHCI Mode''' setting to '''Enabled'''
 
* Browse to the '''Advanced -> South Bridge Configuration -> SB USB Config''' menu and set the '''xHCI Mode''' setting to '''Enabled'''
 +
* Press the F10 key for Save&Exit

Revision as of 07:39, 14 October 2018

  • Install the Chipset driver before the USB3.0 driver
  • Download the USB3.0 driver
  • Run the OfflineSetup32.exe for Windows 7 32bit or the OfflineSetup64.exe for Windows 7 64bit
  • Follow the on-screen instructions
  • At the the end of installation process, reset the unit
  • Enter the BIOS menu by pressing the F key during the boot
  • Browse to the Advanced -> South Bridge Configuration -> SB USB Config menu and set the xHCI Mode setting to Enabled
  • Press the F10 key for Save&Exit