Difference between revisions of "How to install mSATA SSD on FM-USB3 module"
From fit-PC wiki
Line 1: | Line 1: | ||
− | + | * This application note instructs how to install or replace mSATA SSD on [[FACE Modules:FM-USB3|FM-USB3 Module]]<br> | |
− | + | * This application note is applicable for the following models: | |
− | + | ** IPC3 HW revisions later than 1.1 , adding an option to add mSATA SSD on FM-USB3 only. | |
− | * IPC3 | + | ** IPC2 (all HW revisions) adding another mSATA on the FM-USB3 in addition to the on-board slot. |
− | * IPC2 (all HW revisions) | + | |
=== Instructions === | === Instructions === |
Latest revision as of 14:02, 8 October 2018
- This application note instructs how to install or replace mSATA SSD on FM-USB3 Module
- This application note is applicable for the following models:
- IPC3 HW revisions later than 1.1 , adding an option to add mSATA SSD on FM-USB3 only.
- IPC2 (all HW revisions) adding another mSATA on the FM-USB3 in addition to the on-board slot.
Instructions
- Open the service door (see Maintenance chapter in IPC3 Owner’s Manual).
- Remove the four screws on the bottom cover of the IPC3.
- Carefully remove the bottom cover.
- Remove the single screw that holds the FM-USB3 card.
- Carefully remove the FM-USB3 card in the computer.
- Now you have full access to mSATA slot. Connect mSATA by gently pushing it into plastic latch.
- Assemble in the reverse order