How to enable RAID on Airtop3
From fit-PC wiki
- This guide instructs how to enable RAID on Airtop3
Instructions
- Enter the BIOS menu by pressing [DEL] on startup
- On BIOS version 0.30.04 and above:
- Navigate to "Quick-Settings" and set "RAID" to [Enabled]
- Press F4 to save and exit
- On BIOS version 0.30.03 and below:
- Navigate to "Chipset" -> "PCH-IO Configuration" -> "SATA And RST Configuration"
- Set "SATA Mode Selection" to [Intel RST].
- Press F4 to save and exit
- Enter the BIOS menu again by pressing [DEL] on startup
- Navigate to "Advanced" -> "Intel(R) Rapid Storage Technology"
- Configure you RAID volume by selecting "Create RAID Volume"
