Fitlet Troubleshooting

From fit-PC wiki
Jump to: navigation, search

1. fitlet BIOS reset:

  • Power down the PC and unplug the power cable.
  • Open the bottom cover (by unscrewing 4 bolts) and remove it.
  • Reset the BIOS by pressing low profile push button (SW3) for 3 seconds located near the high mini PCIe slot, as shown in the picture below.
  • Plug the power and power up the PC (either auto-on or pressing power button).
  • Note: fitlet disassembly video
Fitlet BIOS reset.jpg

2. Check the RAM memory:

  • Remove the top cover (refer to fitlet Owner’s Manual)
  • Verify RAM module is installed and in place. The system will not boot without memory.
  • fitlet should be used with low power (1.35V) memory only.
  • Install the memory back.

3. Power up without storage:

  • Try to enter the BIOS by clicking Del during boot

4. Power supply:

  • Verify the power supply is not damaged and functions properly.
  • If you have another power supply use it to eliminate and determine the failing side.
  • In case you use other power supply make sure it provides uninterrupted power and stable grounding.

5. fitlet BIOS Update

6. RMA procedure