Difference between revisions of "Fitlet BIOS guide"
From fit-PC wiki
(→Power Settings) (change visibility) |
(→Power Settings) (change visibility) |
||
Line 44: | Line 44: | ||
* Lock Legacy Resources: TBD | * Lock Legacy Resources: TBD | ||
* Restore on AC Power Loss: TBD | * Restore on AC Power Loss: TBD | ||
− | * '''APU TDP''': Set processor maximum power consumption (thermal design power). Enter values between 1-25000 [mW], when default is 4500 [mW]. | + | * '''APU TDP''': Set processor maximum power consumption (thermal design power). Enter values between 1-25000 [mW], when default value is 4500 [mW]. Higher value means better performance, and hence higher temperature. |
==== TPM Settings ==== | ==== TPM Settings ==== |
Revision as of 10:36, 18 May 2015
Overview
- See what is BIOS
- fitlet BIOS is based on American Megatrends Inc. (AMI) BIOS.
- BIOS can be accessed by pressingDel during power up cycle.
BIOS Menu
Main
The screen provides date, time and boot features settings, as well as basic system information.
System information contains the following information:
- BIOS Vendor: American Megatrends
- Core Version: 4.6.5.4
- Compliancy: UEFI 2.3.1; PI 1.2
- BIOS Version: SBCFLT_0.08.02_7
- Build Date and Time: MM/DD/YYYY HH:MM:SS
- System Date: HH:MM:SS
- System Time: Weekday MM/DD/YYYY
- Access Level: Administrator
Advanced
The section provides advanced system features and functionality settings.
Warning: Setting items in this section to incorrect values may cause system to malfunction.
PCI Settings
- PCI Latency Timer: TBD
- VGA Palette Snoop: TBD
- PERR# Generation: TBD
- SERR# Generation: TBD
- Relaxed Ordering: TBD
- Extended Tag: TBD
- No Snoop: TBD
- Maximum Payload: TBD
- Maximum Read Request: TBD
- ASPM Support: TBD
- Extended Synch: TBD
- Link Training Retry: TBD
- Link Training Timeout (uS): TBD
- Restore PCIE Registers: TBD
Power Settings
- ACPI Auto Configuration: TBD
- Hibernation State: TBD
- Sleep State: TBD
- Lock Legacy Resources: TBD
- Restore on AC Power Loss: TBD
- APU TDP: Set processor maximum power consumption (thermal design power). Enter values between 1-25000 [mW], when default value is 4500 [mW]. Higher value means better performance, and hence higher temperature.
TPM Settings
- Security Device Support: TBD
CPU Settings
- PSS Support: TBD
- PSTATE Adjustment: TBD
- NX Mode: TBD
- SVM Mode: TBD
- C6 Mode: TBD
- CPB Mode: TBD
- Core Leveling Mode: TBD
Video Settings
- Integrated Graphics: TBD
- UMA Frame Buffer Size: TBD
- Remote Display Feature: TBD
- HDMI Audio: TBD
- IOMMU: TBD
- PSPP Policy: TBD
SATA Settings
- OnChip SATA Channel: TBD
- OnChip SATA Type: TBD
- OnChip IDE Mode: TBD
- SATA IDE Combined Mode: TBD
Memory Settings
- Memory Clock: TBD
- Memory Clear: TBD
Memory Configuration
- Memory Hole Remapping: TBD
- Bank Interleaving: TBD
- Memory Hole 15MB – 16MB: TBD
- Socket Information
SDIO Settings
- SDIO Access Mode: TBD
- Mass Storage Device Emulation Type: TBD
USB Settings
- Legacy USB Support: TBD
- XHCI Hand-off: TBD
- EHCI Hand-off: TBD
- USB Mass Storage Driver Support: TBD
- Port 60/64 Emulation: TBD
- USB transfer timeout: TBD
- Device reset timeout: TBD
- Device power-up delay: TBD
Boot
- Setup Prompt Timeout: TBD
- Bootup Numlock State: TBD
- Quiet Boot: TBD
- Fast Boot: TBD
- SATA Support : TBD
- VGA Support: TBD
- USB Support: TBD
- PS2 Device Support: TBD
- Network Stack Driver Support: TBD
- UEFI Boot: TBD
- Boot Mode Select: TBD
- Fixed Boot Order Priorities: TBD
CSM16 Parameters
- GateA20 Active: TBD
- Option ROM Messages: TBD
- INT19 Trap Response: TBD
CSM Parameters
- Launch CSM: TBD
- Boot option filter: TBD
- Launch PXE OpROM policy: TBD
- Launch Storage OpROM policy: TBD
- Launch Video OpROM policy: TBD
- Other PCI device ROM priority: TBD
- USB Key Drive BBS Priorities
Security
- Administrator Password: TBD
- User Password: TBD
Secure Boot Menu
- Secure Boot: TBD
- Secure Boot Mode: TBD
- Key Management: TBD
Save & Exit
The exit screen provides options to save or discard changes before exiting BIOS.