Difference between revisions of "Fitlet: BIOS Update"
From fit-PC wiki
Line 18: | Line 18: | ||
# Browse to the '''Save & Exit''' menu | # Browse to the '''Save & Exit''' menu | ||
# Click on the '''Launch EFI Shell from filesystem device''' option | # Click on the '''Launch EFI Shell from filesystem device''' option | ||
− | # The system will boot to the EFI Shell, and after 4 seconds the automatic flash process will start. <br> '''Note:''' At the start of the process, the system will hang for 1 minute. This is expected behaviour. Please, don’t interrupt it | + | # The system will boot to the EFI Shell, and after 4 seconds the automatic flash process will start. <br> '''Note:''' At the start of the process, the system will hang for 1 minute. This is expected behaviour. Please, don’t interrupt it |
# At the end of the flashing process, remove the UFD, type the command '''reset''' and press the Enter key | # At the end of the flashing process, remove the UFD, type the command '''reset''' and press the Enter key | ||
[[category:fitlet]] | [[category:fitlet]] | ||
[[category:BIOS]] | [[category:BIOS]] |
Revision as of 12:37, 14 February 2018
Follow us on Google+ for software and BIOS updates
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.
- Format the USB Flash Device (UFD) to FAT32 file system
- Download and extract the BIOS Updater Package
The package contains the following files:- AfuEfix64.efi
- Flash.nsh
- Shellx64.efi
- Startup.nsh
- Copy the extracted files to the UFD
- Download and extract the fitlet BIOS file
- Copy the BIOS file to the UFD
- Connect the UFD to the target unit and power up
- Press the DEL key during the boot until the BIOS Setup appears
- Browse to the Save & Exit menu
- Click on the Launch EFI Shell from filesystem device option
- The system will boot to the EFI Shell, and after 4 seconds the automatic flash process will start.
Note: At the start of the process, the system will hang for 1 minute. This is expected behaviour. Please, don’t interrupt it - At the end of the flashing process, remove the UFD, type the command reset and press the Enter key