Fitlet: BIOS

From fit-PC wiki
Jump to: navigation, search

fitlet BIOS Update

For detailed BIOS configuration and settings refer to fitlet BIOS guide.

Preparing a bootable USB flash device on a Windows PC

  1. Download and install Image Writer for Windows. You can use any other application that flashes image to the USB storage device. For example: Passmark ImageUSB.
  2. Download and extract Bios Updater image.
  3. Connect the USB flash device to your host PC (ensure that you don't have any other USB mass storage devices connected).
  4. Run Win32DiskImager.
  5. Select the target disk in the Device drop-box.
  6. Select the extracted BIOS_Updater.img in the Image File search-box.
  7. Press Write button to proceed.
  8. Wait until completion.
  9. Disconnect the USB flash device and connect it again. It should now be assigned a drive letter.
  10. Download the latest BIOS binary file.
  11. Copy the bios-flt.bin file to the root directory on the USB flash device.

Updating BIOS

  1. Connect the prepared USB flash device to the fitlet and boot (ensure that the UFD should be connected to the USB2 connector only).
  2. Press the DEL key during boot to enter BIOS setup utility.
  3. Set 1st boot priority to USB HDD.
  4. Save and exit.
  5. The fitlet should boot to DOS from the USB device.
  6. Type flash.bat
  7. Wait until a "BIOS is updated successfully" message appears.
  8. Disconnect the USB device and reboot.


Links