Difference between revisions of "Fitlet: BIOS"
From fit-PC wiki
(→Updating BIOS) (change visibility) |
(→Updating BIOS) (change visibility) |
||
Line 16: | Line 16: | ||
== Updating BIOS == | == Updating BIOS == | ||
− | # Connect the prepared USB flash device to the fitlet and boot ( | + | # Connect the prepared USB flash device to the fitlet and boot (it should be connected to the USB2 connector only). |
# Press the DEL key during boot to enter BIOS setup utility. | # Press the DEL key during boot to enter BIOS setup utility. | ||
# Set 1st boot priority to USB Key. | # Set 1st boot priority to USB Key. |
Revision as of 05:58, 8 July 2015
Contents
fitlet BIOS Update
For detailed BIOS configuration and settings refer to fitlet BIOS guide.
Preparing a bootable USB flash device on a Windows PC
- Download and install Image Writer for Windows. You can use any other application that flashes image to the USB flash device. For example: Passmark ImageUSB.
- Download and extract Bios Updater image.
- Connect the USB flash device to your host PC (ensure that you don't have any other USB storage devices connected).
- Run Win32DiskImager.
- Select the target disk in the Device drop-box.
- Select the extracted BIOS_Updater.img in the Image File search-box.
- Press Write button to proceed.
- Wait until completion.
- Disconnect the USB flash device and connect it again. It should now be assigned a drive letter.
- Download the latest BIOS binary file.
- Copy the bios-flt.rom file to the root directory on the USB flash device.
Updating BIOS
- Connect the prepared USB flash device to the fitlet and boot (it should be connected to the USB2 connector only).
- Press the DEL key during boot to enter BIOS setup utility.
- Set 1st boot priority to USB Key.
- Save and exit.
- The fitlet should boot to DOS from the USB flash device.
- Type flash.bat
- Wait until completion.
- Disconnect the USB flash device and reboot.