Difference between revisions of "Fitlet-H BIOS Update"
From fit-PC wiki
Line 4: | Line 4: | ||
* BIOS update recommended in case the system is unstable, or required fixes have been released. | * BIOS update recommended in case the system is unstable, or required fixes have been released. | ||
* Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step. | * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step. | ||
− | * Check for latest BIOS version available [[Fitlet-H: BIOS ROM Files|fitlet-H BIOS ROM Files]] and compare to | + | * Check for latest BIOS version available [[Fitlet-H: BIOS ROM Files|fitlet-H BIOS ROM Files]] and compare to BIOS Version on your fitlet. |
== Preparing the USB Flash Drive with BIOS Updater == | == Preparing the USB Flash Drive with BIOS Updater == |
Revision as of 07:38, 21 August 2017
Follow us on Google+ for software and BIOS updates
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step. * Check for latest BIOS version available fitlet-H BIOS ROM Files and compare to BIOS Version on your fitlet.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive to your computer and format it using FAT32.
- Download and extract Bios Updater package.
The package contains the following files:
- AfuEfix64.efi
- Flash.nsh
- Shellx64.efi
- Copy the extracted files to the formatted USB Flash Drive.
- Download the BIOS binary file.
- Copy the flt.rom file to the root directory on the USB Flash Drive.
Updating BIOS
- Connect the prepared USB flash device to the fitlet and boot.
- Press the DEL key during boot to enter BIOS menu.
- Under Save & Exit tab, select the option “Launch EFI Shell from filesystem device”
- When the system enters the UEFI mode, type the command: FLASH FLTT and press Enter.
- The BIOS flashing process will start.
Note: At the start of the process, the system will hang for 1 minute. This is expected behavior. Please, don’t interrupt it.
- When the process ends and the prompt line appears, type the command: reset and press Enter.
- Press the DEL key during the restart and enter the BIOS menu.
- Under Save & Exit tab, select the option “Restore Defaults” and after that “Save Changes and Reset”.