Difference between revisions of "FAQ:IPC2"
From fit-PC wiki
(→Links) (change visibility) |
|||
Line 2: | Line 2: | ||
=== Which power supplies can power the IPC2? === | === Which power supplies can power the IPC2? === | ||
IPC2 bundle comes with external AC/DC wall power supply, providing unregulated 10–15Vdc input voltage range, 12Vdc nominal. However, any power supply able to supply ~60W from 12Vdc source will be fine. | IPC2 bundle comes with external AC/DC wall power supply, providing unregulated 10–15Vdc input voltage range, 12Vdc nominal. However, any power supply able to supply ~60W from 12Vdc source will be fine. | ||
+ | |||
+ | === IPC2 serial ports === | ||
+ | IPC2 features three RS232 serial ports, one full signal set and two other 2-wire Tx/Rx signals only. | ||
+ | |||
+ | * Port 1 (left): Serial 2-wire com port (SuperIO Controller) | ||
+ | * Port 2 (middle): Serial 2-wire com port (Embedded Controller) | ||
+ | * Port 3 (right): Serial full signal set com port (SuperIO Controller) | ||
+ | |||
+ | Notes: | ||
+ | # Operating system can be a factor. We recommend to test the ports under Linux Mint 17 or Windows 7 | ||
+ | # The operation can be dependent on devices connected, as the ports are not identical | ||
+ | # The middle port operated by Embedded Controller which is part of Intel architecture is not under Compulab control | ||
+ | |||
== Software == | == Software == |
Revision as of 10:51, 1 June 2015
Contents
Hardware
Which power supplies can power the IPC2?
IPC2 bundle comes with external AC/DC wall power supply, providing unregulated 10–15Vdc input voltage range, 12Vdc nominal. However, any power supply able to supply ~60W from 12Vdc source will be fine.
IPC2 serial ports
IPC2 features three RS232 serial ports, one full signal set and two other 2-wire Tx/Rx signals only.
- Port 1 (left): Serial 2-wire com port (SuperIO Controller)
- Port 2 (middle): Serial 2-wire com port (Embedded Controller)
- Port 3 (right): Serial full signal set com port (SuperIO Controller)
Notes:
- Operating system can be a factor. We recommend to test the ports under Linux Mint 17 or Windows 7
- The operation can be dependent on devices connected, as the ports are not identical
- The middle port operated by Embedded Controller which is part of Intel architecture is not under Compulab control
Software
Links