Difference between revisions of "Application note - CANbus on fitlet2 with FC-SCG running Linux"

From fit-PC wiki
Jump to: navigation, search
Line 4: Line 4:
 
*[https://fit-iot.com/files/download/fitlet2/sw/drivers/Linux/fitlet2-linux-FTDI-CAN-sniffer-master.tar.gz fitlet2 FTDI CAN sniffer]
 
*[https://fit-iot.com/files/download/fitlet2/sw/drivers/Linux/fitlet2-linux-FTDI-CAN-sniffer-master.tar.gz fitlet2 FTDI CAN sniffer]
  
Simple CAN bus sniffer.
+
==Simple CAN bus sniffer==
 +
 
 
Purposed for the following chain: FTDI232H <-> MCP2515.
 
Purposed for the following chain: FTDI232H <-> MCP2515.
 
Tested on Linux 4.14.41 (Debian sid)
 
Tested on Linux 4.14.41 (Debian sid)
Line 17: Line 18:
 
  sniff.static -- statically linked executable
 
  sniff.static -- statically linked executable
  
Usage:
+
'''Usage:'''
  
 
Prints received frames to STDOUT, sends to net frames gotten from STDIN.
 
Prints received frames to STDOUT, sends to net frames gotten from STDIN.
Line 43: Line 44:
  
 
Allowed frame to be sent format:
 
Allowed frame to be sent format:
sid:paiload[0...i]
+
sid:paiload[0...i]
sid-eid:paiload[0...i]
+
sid-eid:paiload[0...i]
 
where i must be less than 8
 
where i must be less than 8
  
 
For more detailed explanation of the mentioned options please read the MCP2515.
 
For more detailed explanation of the mentioned options please read the MCP2515.
CAN bus interface chip datasheet:
+
[http://ww1.microchip.com/downloads/en/DeviceDoc/20001801H.pdf CAN bus interface chip datasheet]
http://ww1.microchip.com/downloads/en/DeviceDoc/20001801H.pdf
+
  
  

Revision as of 11:42, 3 October 2018

fitlet2 supports CAN if configured with the FC-SCG FACET.

The following application is required for the CAN bus functionality:

Simple CAN bus sniffer

Purposed for the following chain: FTDI232H <-> MCP2515. Tested on Linux 4.14.41 (Debian sid)

Prerequisites: libmpsse-1.3

libftdi1-1.4 via https://www.intra2net.com/en/developer/libftdi/repository.php
libusb-1.0   via https://libusb.info/

Avaliable binaries:

sniff -- dynamically linked against mentioned libraries
sniff.static -- statically linked executable

Usage:

Prints received frames to STDOUT, sends to net frames gotten from STDIN. Options:

       --can_bitrate Hz        required CAN bus speed
       --can_osc Hz            CAN clock oscillator frequency in fact

decimal modifiers 'k' and 'M' are allowed

       --promiscuous [01]      a given RX buffer is to receive all frames
       --rollover              rollover mode for RX buffer 0
       --mask [01]:sid-eid     acceptance mask for a mentioned RX buffer
       --filter [012345]:sid-eid       acceptance filter

filters 0 and 1 are purposed for RX buffer 0 and the others for RX buffer 1

       mask and filters format: n:sid-eid
       where:
       num     number of mask or filter
       sid     Standard identifier of mask/filter
       eid     enhanced identifier of mask/filter

Omitted eid (if any) will be zeroed.

       --sniff                 listen-only mode
       --showraw               print out frames received/to be sent in hex

Allowed frame to be sent format:

sid:paiload[0...i]
sid-eid:paiload[0...i]

where i must be less than 8

For more detailed explanation of the mentioned options please read the MCP2515. CAN bus interface chip datasheet