Difference between revisions of "Application note - Airtop3 configure PXE boot"
From fit-PC wiki
(Created page with "* This application note applies to Airtop3 * It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment. ==Instructions== #....") (change visibility) |
|||
Line 3: | Line 3: | ||
==Instructions== | ==Instructions== | ||
− | # | + | # Enter the BIOS menu by pressing "'''ESC'''" on startup. |
− | # | + | # In the BIOS menu, browse to '''Advanced''' -> '''Network Stack Configuration''' menu. |
− | # | + | # Set the '''Network Stack setting''' to ['''Enabled'''], as a result, additional settings will appear. |
− | # | + | # Enable the appropriate functionality. |
− | + | ** <u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled''']. | |
− | # | + | # Press '''F4''' to save and exit. |
− | # | + | # Confirm by entering BIOS menu and checking at '''Boot''' tab that the "'''UEFI PXE'''" option appears in the boot priorities list. |
Revision as of 13:33, 17 November 2019
- This application note applies to Airtop3
- It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment.
Instructions
- Enter the BIOS menu by pressing "ESC" on startup.
- In the BIOS menu, browse to Advanced -> Network Stack Configuration menu.
- Set the Network Stack setting to [Enabled], as a result, additional settings will appear.
- Enable the appropriate functionality.
- For example: for Ipv4 PXE functionality, set the Ipv4 PXE Support setting to [Enabled].
- Press F4 to save and exit.
- Confirm by entering BIOS menu and checking at Boot tab that the "UEFI PXE" option appears in the boot priorities list.