Difference between revisions of "Airtop Troubleshooting"
From fit-PC wiki
Line 3: | Line 3: | ||
*Open the service door. | *Open the service door. | ||
*Remove the disks cartridge. | *Remove the disks cartridge. | ||
− | *Reset the BIOS by pressing the low profile push button SW4 (RTC_RST) | + | *Reset the BIOS by pressing the low profile push button SW4 (RTC_RST). |
*Mount the disks cartridge and close the door. | *Mount the disks cartridge and close the door. | ||
*Plug the power and power up the PC (either auto-on or pressing power button). | *Plug the power and power up the PC (either auto-on or pressing power button). |
Revision as of 08:51, 24 August 2016
1. Airtop BIOS reset:
- Power down the PC and unplug the power cable.
- Open the service door.
- Remove the disks cartridge.
- Reset the BIOS by pressing the low profile push button SW4 (RTC_RST).
- Mount the disks cartridge and close the door.
- Plug the power and power up the PC (either auto-on or pressing power button).
2. Check memory (RAM):
- Verify RAM modules are installed. The system will not boot without it.
3. Check storage (HDD/SSD):
- Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
4. Check power supply (PSU):
- Verify the power supply is not damaged and functions properly.
- If you have another power supply use it to eliminate and determine the failing side.
- In case you use other power supply make sure it provides uninterrupted power and stable grounding.