Difference between revisions of "Airtop: Installing I3M Linux Daemon"

From fit-PC wiki
Jump to: navigation, search
Line 1: Line 1:
'''I<sup>3</sup>M''' - The integrated interactive information monitor is a GUI system integrated in the front panel of Airtop.<br>
+
Airtop [[Airtop:I3M | I<sup>3</sup>M]] daemon for Linux installation instructions:
I<sup>3</sup>M has the following major components:
+
 
+
* An OLED display.
+
* Navigation keys.
+
* Programmable micro-controller.
+
* Interfaces to power and temperature sensors on the motherboard.
+
* Serial interfaces for communication with BIOS and operating system.
+
* The user can navigate through menus between multiple screens of the I3M that display system information, temperatures, power consumption and notifications.
+
* I<sup>3</sup>M firmware can be upgraded.
+
 
+
 
+
=== I<sup>3</sup>M Linux Daemon ===
+
 
# You need to install the [http://www.fit-pc2.com/download/airtop/Linux/mint/17/airtop-fpsvc_1.0-1_upstart.deb airtop-fpsvc] service that provides system information to the front panel
 
# You need to install the [http://www.fit-pc2.com/download/airtop/Linux/mint/17/airtop-fpsvc_1.0-1_upstart.deb airtop-fpsvc] service that provides system information to the front panel
 
# Reboot the Airtop after installation
 
# Reboot the Airtop after installation

Revision as of 08:51, 28 July 2016

Airtop I3M daemon for Linux installation instructions:

  1. You need to install the airtop-fpsvc service that provides system information to the front panel
  2. Reboot the Airtop after installation
  3. Now you can navigate through menus between multiple screens of the I3M that display system information, temperatures, power consumption and notifications

Links