Airtop2 - RAID configuration guide (Intel RST)

• The following guide provides a step by step configuration instructions to configure RAID on the Airtop2.

• PDF - Airtop2 (Intel RST) Raid Configuration guide

• • Note: In order to install the Windows Server 2016, it is required to load the Intel RST driver before starting the OS installation. Follow the below instructions:

1. Browse to the Intel RST Driver download page
2. Download the Intel RST driver package: f6flpy-x64.zip.
3. Unzip the package and copy it to the USB storage device.
4. Start Windows Server 2016 installation on the target Airtop2 unit after you set the RAID.
5. On the Disk Selection page, connect the USB Storage device with Intel RST driver package to the target Airtop2 and click Load Driver.
6. Click Browse and select the folder with Intel RST driver and then click OK.
7. Select the Intel Chipset RST Premium Controller and click Next.
8. When the system is back to the Disk Selection window, click Load Driver again.
9. Browse to the Intel RST driver package and select the Intel RST Software Components Extension.
10. When the system is back to the Disk Selection window, click Next and the installation will begin.