Hi, as it was mentioned in these forums and also in the manual that I received with the Intense PC Value, the graphics outputs are automatically desactivated when nothing connected.
Can you please explain exactly what does it exactly mean "nothing connected":
- the cables not connected, or
- monitor connected but not active (to me this seems to be the case actually)
The issue I have is:
My monitor (HP LP2475w) has 7 inputs (3 out of that are in use, including Intense PC attached to one of them).
In order to switch between inputs there are 2 modes supported:
- manual scan
- automatic scan
In the first one you need to press a button to switch between all the 7 inputs. This works fine with Intense PC, but is a bit annoying (cycling even through inputs not in use).
In the second one you need to press a button to switch between the active inputs only. This does not work - attached Intense PC is not detected.
So it seems to me that the "IntensePC graphics turns off when nothing connected" means also "IntensePC graphics turns off even when monitor is connected but not active". It seems to me that the issue is that during the "active inputs detection" the monitor activates for a short moment the Intense PC display port, after a short while Intense PC graphics turns on, but it is already too late - before this the monitor already makes the conclusion that nothing is connected.
Is there some way to change this behavior (to keep the graphics output always on)? I didn't find anything related in the Bios.
Automatic graphics output desactivation - Can be turned off?
Re: Automatic graphics output desactivation - Can be turned
After reviewing your problem, I am agree with you that the graphic disactivation is may be the most possible source of your problem. Unfortunately, Intel provides a closed source graphic drivers, which cannot be modified. There is can be a hardware solution for your problem, which evolve hdmi cable modification to make hotplug detect pin always high. Please do it on your own risk only.
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.
Return to “Intense PC hardware”
Jump to
- Announcements
- ↳ Read me first
- ↳ News
- ↳ Ordering
- Tensor-PC
- ↳ General Tensor-PC questions
- ↳ Tensor-PC Hardware
- ↳ Tensor-PC Software
- fitlet3
- ↳ General fitlet3 questions
- ↳ fitlet3 hardware
- ↳ fitlet3 software
- ↳ fitlet3 FACET Cards
- Airtop3
- ↳ General Airtop3 questions
- ↳ Airtop3 Hardware
- ↳ Airtop3 Software
- ↳ Airtop3 I3M
- fitlet2 and MBM2
- ↳ General fitlet2 questions
- ↳ fitlet2 hardware
- ↳ fitlet2 software
- ↳ fitlet2 FACET Cards
- ↳ Cool stuff with fitlet2
- Airtop2
- ↳ General Airtop2 questions
- ↳ Airtop2 Software
- ↳ Airtop2 Hardware
- ↳ Airtop2 I3M
- Mature products
- ↳ Airtop
- ↳ General Airtop questions
- ↳ I3M
- ↳ IPC2 (Intense PC2)
- ↳ General IPC2 questions
- ↳ IPC2 availability
- ↳ IPC2 Hardware
- ↳ Linux on IPC2
- ↳ Windows on IPC2
- ↳ Other operating systems on IPC2
- ↳ IPC2 BIOS
- ↳ IPC2 faults and troubleshooting
- ↳ Intense PC and MintBox 2
- ↳ General Intense PC questions
- ↳ Intense PC hardware
- ↳ CPU & Chipset
- ↳ Display interface
- ↳ Memory
- ↳ Storage
- ↳ Ethernet
- ↳ WLAN and miniPCI-e
- ↳ Audio
- ↳ USB
- ↳ Power and heat
- ↳ Linux on Intense PC
- ↳ Linux Mint
- ↳ Other distributions
- ↳ Windows on Intense PC
- ↳ Win7 on Intense PC
- ↳ Win8 on Intense PC
- ↳ Audio
- ↳ Intense PC BIOS
- ↳ Android on Intense PC
- ↳ Intense PC faults and troubleshooting
- ↳ fitlet and MintBox Mini
- ↳ General fitlet questions
- ↳ fitlet performance
- ↳ fitlet hardware
- ↳ Memory
- ↳ Storage
- ↳ Power and heat
- ↳ Mechanical
- ↳ fitlet BIOS
- ↳ Linux on MintBox Mini / Linux on fitlet
- ↳ Windows on fitlet
- ↳ Other operating systems on fitlet
- ↳ FACET Cards
- ↳ fitlet compatible devices
- ↳ Cool stuff with fitlet
- ↳ fitlet faults and troubleshooting
- ↳ fit-PC4
- ↳ General fit-PC4 questions
- ↳ fit-PC4 hardware
- ↳ Windows on fit-PC4
- ↳ Linux on fit-PC4
- ↳ Other operating systems on fit-PC4
- ↳ fit-PC4 BIOS
- ↳ fit-PC4 faults and troubleshooting
- ↳ fit-PC3
- ↳ General fit-PC3 questions
- ↳ fit-PC3 hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Power and Heat
- ↳ Ethernet
- ↳ Windows on fit-PC3
- ↳ Linux on fit-PC3
- ↳ Other operating systems on fit-PC3
- ↳ fit-PC3 BIOS
- ↳ fit-PC3 accessories
- ↳ Using fit-PC3
- ↳ fit-PC3 faults and troubleshooting
- ↳ fit-PC2
- ↳ General fit-PC2 questions
- ↳ Buying fit-PC2
- ↳ Linux on fit-PC2
- ↳ Linux Mint
- ↳ Ubuntu 9.10
- ↳ Ubuntu 10.04
- ↳ Ubuntu 10.10
- ↳ Ubuntu 11.04
- ↳ Other Linux distributions
- ↳ Ubuntu 8.04
- ↳ Ubuntu 9.04
- ↳ Display driver
- ↳ Multimedia in Linux
- ↳ Multimedia in Mint
- ↳ Windows on fit-PC2
- ↳ Windows 7
- ↳ Windows 7 display driver
- ↳ Audio in Win7
- ↳ Windows XP
- ↳ XP installation
- ↳ Display driver
- ↳ Video playback
- ↳ Audio in XP
- ↳ Other Windows versions
- ↳ Other operating systems on fit-PC2
- ↳ FreeBSD
- ↳ fit-PC2 hardware
- ↳ fit-PC2i hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Auto-ON
- ↳ Power and Heat
- ↳ Ethernet
- ↳ RTC & System clock
- ↳ fit-PC2 BIOS
- ↳ BIOS updates fit-PC2
- ↳ BIOS updates fit-PC2i
- ↳ fit-PC2 accessories
- ↳ Using fit-PC2
- ↳ HTPC
- ↳ Server
- ↳ Control
- ↳ Verified displays
- ↳ Car PC
- ↳ fit-PC1 questions
- ↳ fit-PC Slim questions
- ↳ uSVR
- ↳ General uSVR questions
- ↳ IPC3
- ↳ General IPC3 questions
- ↳ IPC3 Software
- ↳ IPC3 Hardware
- ↳ FACE modules
- ↳ FACE Modules
- ↳ General FACE Module questions
- Compulab accessories
- ↳ fit-Headless and fit-Headless 4K
- ↳ fit-Uptime
- ↳ fit-statUSB
- ECN/PCN
- ↳ fitlet3 ECN/PCN
- ↳ Tensor-I20 ECN/PCN
- ↳ Tensor-I22 ECN/PCN
- ↳ fitlet2 ECN/PCN
- ↳ Airtop3 ECN/PCN
- ↳ IPC3 ECN
- ↳ fitlet1 ECN
- ↳ IPC2 ECN
- ↳ IPC1 ECN
- ↳ Airtop2 ECN
- ↳ Airtop1 ECN
- ↳ fit-PC4 ECN
- ↳ fit-PC3 ECN
- ↳ fit-PC2 ECN
- ↳ FACE Modules ECN
- ↳ FACET Cards ECN
- Wish list
- ↳ Addressed requests