Boot without periferals

[Sandro]

Please I need to know if there is the possibility to boot the fit-PC2 without monitor, keyboard and mouse connected. I did not find this possibility in Bios.

[MSX]

it should work normally without periferals, you don't need to touch anything in the BIOS

[Steffel]

The only issue is that without a monitor attached the fit-pc2 boots under Windows XP with a resolution of 1024x768. I'm running my fit-pc2 without peripherals, controlled by TightVNC.

[Ryelands]

This was an issue with the Fit-PC2 but it was resolved by a new driver. Go to:

http://www.fit-pc2.com/forum/viewtopic.php?f=36&t=601

download the "no detect" driver and follow Irad's procedure near the end of the thread. You need a local monitor for initial set up but otherwise it's just fine.

HTH

Dave